Author Topic: Mooring at marina - cleats?  (Read 360 times)

olyjeff

  • U20 Virgin
  • *
  • Posts: 9
Mooring at marina - cleats?
« on: January 01, 2019, 11:03:17 AM »
My U20 has bottom paint and I plan on mooring my boat at the marina this summer. I'm curious how people tie their boats up to the dock. Have you installed cleats? I see some on eBay that mount kinda flush and fold up when needed.

Thoughts?

Thanks!


Chris Chambers

  • Administrator
  • U20 Youngster
  • *****
  • Posts: 49
  • Black Sheep #1
Re: Mooring at marina - cleats?
« Reply #2 on: January 07, 2019, 05:42:54 PM »
If you are thinking of adding these as cleats to the boat - I might reconsider.  I try to avoid putting more holes in the boat and especially anything that will catch a sheet, toe or a sail!  I tie off to the bow ring and to the base of the stanchions for the stern and spring lines.  I had a Taylormade round ball one summer and it ended up scratching the gel coat on the topsides, so I mounted these to the dock.  They are nice when you are short handed sailing back to the dock and don't have to mess with fenders on the boat.

https://www.holmesms.com/ 

Chris

Mark Allen

  • #26 JUNTA
  • Active Member
  • U20 Enthusiast
  • **
  • Posts: 174
Re: Mooring at marina - cleats?
« Reply #3 on: January 07, 2019, 06:54:23 PM »
I would agree with Chris and avoid adding holes to the deck. This is a typical tie up to a dock. if you have a finger both sides I have placed a shackle or clip in the middle of the bow line to clip easily, then tie off the stern from the rear stantions. I also spring to the forward stantion or to the spinnaker sheet bock on cleat.
Duck or Die!