Author Topic: U20 code '0' experience (re: Allen Townsend 2018 question)  (Read 1479 times)

Don Corey

  • Active Member
  • U20 Enthusiast
  • **
  • Posts: 145
U20 code '0' experience (re: Allen Townsend 2018 question)
« on: March 01, 2019, 07:18:28 PM »
Sorry, have not been on the FORUM for quite a while.  I've been running code '0's on the U20 for years in handicap racing with a lot of success.  They add a new dimension to sailing this awesome boat, if nothing else just more fun.  Sailing four legs of a twice around W/L (skewed) course with the spinnaker flying can be a lot of fun and certainly turns some heads.
Don Corey   #25  fore 
U20 Class member since 1997

Mark Allen

  • #26 JUNTA
  • Active Member
  • U20 Enthusiast
  • **
  • Posts: 177
Re: U20 code '0' experience (re: Allen Townsend 2018 question)
« Reply #1 on: March 04, 2019, 04:50:06 PM »
Do you have any pictures of the boat flying the sail?

Thanks

Mark
Duck or Die!

Allen Townsend

  • Active Member
  • U20 Middle Lifer
  • **
  • Posts: 53
    • When I am not sailing
Re: U20 code '0' experience (re: Allen Townsend 2018 question)
« Reply #2 on: March 04, 2019, 05:26:29 PM »
Don,  I would also appreciate a picture or two of you flying your code 0 or other nonstandard headsails if you have any to post.

Thanks for your call yesterday.  It sounds like this will be a good sail for me to add to my inventory.  I have ordered a code 0 from Tac Boston.  I also just purchased a Ronstan 80 top down furler which I will be trying out this spring with both the code 0 and the class asymmetrical spinnaker.  If anyone is interested, I will try to post some pictures. 

Allen
Bomazeen #7




Mike Silverton

  • Wannabees
  • U20 Virgin
  • *
  • Posts: 10
  • "Better When Wet" #141
Re: U20 code '0' experience (re: Allen Townsend 2018 question)
« Reply #3 on: September 12, 2020, 11:06:21 PM »
I know this is an old thread, but did you ever post pictures?
Mike

Michael Eisenberg

  • Active Member
  • U20 Enthusiast
  • **
  • Posts: 103
Re: U20 code '0' experience (re: Allen Townsend 2018 question)
« Reply #4 on: September 18, 2020, 06:13:45 PM »
Sorry, I don't have photos.  I have a code zero that Ullman cut down from a M24(?).  It helped when conditions were right, but less than I thought it would.  I then bought a free luff 155% Jib Top, tacked at the bow and raised with a 2nd spinnaker halyard.  It is sheeted at the spinnaker sheet blocks.  That is a great sail. and much more useful, especially if single handed.